Eyeglasses

Lunor at Voorthuis.

German precision, vintage references, quiet craft · Since 1991, Baden-Wurttemberg

Lunor is the German optical archive translated into wearable frames. The founder, Gernot Lindner, built the brand on a private collection of 19th- and 20th-century spectacles, then reissued the silhouettes with modern measurements, hand-finished acetate, and German hardware. The result reads as heritage without costume.

Lunor at Voorthuis
Best of Bethesda award
Best place to buy eyeglassesEvery year since 2018!
8Neighborhood locations
53Years serving the DMV
35+High-end designs
Signatures

What you get with Lunor.

Lunor's classic round frames in a display drawer at Voorthuis
i.

Vintage references, modern fit

Every Lunor model traces back to an antique in the company archive. The shapes are historically literate (panto, club master, Windsor round), yet the bridge, temple, and pantoscopic geometry are reworked for the modern face.

ii.

Hand-finished acetate

Mazzucchelli acetate, milled in Germany, polished by hand. The depth of color on a Lunor havana or amber is unmistakable up close, the kind of finish that only emerges from days of bench work.

iii.

The Lunor signature rivet

A small horizontal pin on the temple, often three-dot. It is the visual signal of the brand and a quiet nod to the 1930s spectacle-makers Lunor reissues. No oversized logo, no etched lens.

iv.

Made in Germany hardware

Stainless temples, nickel-silver alloys, and bench-grade hinges. The build feels heavier than you expect in the hand and lighter than you expect on the face. That balance is a Lunor trademark.

A closer look

Why we carry Lunor.

What stands out, what to expect, and how a Lunor frame ages over time.

Lunor frames on a glass shelf beside a 'Lunor eyewear, handmade in Germany' display card at Voorthuis

The Lunor collections

The classic acetate line (the A series), the metal models (M series), the rimless line, and the limited-edition reissues of historical frames. The A5 and A6 panto shapes are the most-requested at our bench. They suit a wide range of faces and age beautifully. We rotate stock across our stores, so call ahead for a specific model.

Why Lunor still feels rare

The brand is distributed sparingly in the US. Few opticians carry the depth of the line. As a preferred Lunor carrier, we are one of them, and Lunor does not chase volume. That restraint shows up in the frames as small production runs, no seasonal noise, and a catalogue that changes slowly. You will see a Lunor frame on someone whose taste you already trust.

Pairing with prescription lenses

Lunor acetate is substantial enough to hold high-index lenses cleanly, and the panto and Windsor round shapes have generous vertical height for progressives. Their nose pads are typically adjustable metal, which lets us fine-tune fit for narrower or wider bridges. We measure by hand and verify at pickup.

Authorized dealer. Voorthuis is an authorized Lunor retailer. Every frame arrives from the brand's authorized channel with the original case and documentation. Stock rotates across our stores - tell us the model you want and we'll transfer it to your preferred neighborhood location for a consultation and fitting.

Pricing. Lunor frames typically range from $500 to $800; limited-edition reissues can sit higher. Prescription lenses are priced separately based on your prescription strength, lens design, and coatings. We provide a written estimate before you commit.

Lens turnaround.Single-vision lenses are typically 5 to 7 business days; progressives, 7 to 10. Adjustments stay free for as long as you wear the frame.

Lunor frames on a glass shelf beside a Lunor-branded wood display block at Voorthuis
Who it fits

Lunor may be right for you if…

i.

You wear panto, Windsor, or club master shapes for the design itself.

ii.

You appreciate German bench work and small-run craft over volume distribution.

iii.

You want a frame that reads quietly but rewards a close look at the hardware.

Not sure yet? Bring your prescription (or get one with us) and we'll lay Lunor side-by-side with the alternatives.
Our process

How we fit you.

No upsell, no rush. Try them on, fitted in person.

  1. 01

    Measurement first

    Bridge width, pupillary distance (PD), and temple length at the bench. These numbers eliminate frames that won't sit correctly on your face.

  2. 02

    Lifestyle and use

    A few questions before we pull any frames: mostly screen work or outdoors? Single pair or adding a sun option? Drive at night? The answers shape lens selection before you've touched a frame.

  3. 03

    Frame trial and comparison

    We pull three to five candidates. You try them in sequence - we give honest opinions on what's working. The two or three that survive go side by side until one is clear.

  4. 04

    Lens selection and precision adjustment

    Lens material, AR coating, tints if relevant. The frame gets adjusted to your face before you leave - bridge, temples, nose pads. That last step is why glasses from us don't slide.

Why Voorthuis

Buying here vs. buying online.

At VoorthuisOnline / elsewhere
Try before you buyEvery frame in our casePhotos only
Authorized dealerYes - manufacturer warranty appliesOften gray market; warranty may be void
Face measurementTaken at the bench by our staffSelf-measured or skipped
Frame adjustment at pickupIncluded - adjusted to your face before you leaveNot available
Prescription verificationReviewed by our optometristsSelf-reported
Ongoing adjustmentsFree, at any of our 8 locationsNot available
Long-term supportFree for the life of the frameNone
Frequently asked

Lunor questions, plainly answered.

How much do Lunor frames cost?
Lunor frames typically range from $500 to $800. Limited-edition reissues and specialty acetates can run higher. Lenses are priced separately based on prescription and coatings.
Why are Lunor glasses so expensive?
Lunor is handmade in Germany in small runs, with Mazzucchelli acetate milled and polished over days of bench work and bench-grade German hardware. The brand does not chase volume, so the price reflects craft and scarcity, plus our in-person fitting and free lifetime adjustments.
Is Voorthuis an authorized Lunor dealer?
Yes. Voorthuis is an authorized Lunor retailer. Few opticians in the DC area carry the brand at this depth, and we receive frames directly from Lunor in Germany.
What are the vintage references in the Lunor catalog?
Lunor reissues nineteenth- and early-twentieth-century spectacle silhouettes (panto, Windsor round, club master) with modern bridge geometry and pantoscopic tilt for the contemporary face. The shapes are historically literate without reading as costume.
Can Lunor be fitted with progressive lenses?
Yes. The A-series panto and Windsor round shapes have enough vertical height for a comfortable progressive corridor. The adjustable metal nose pads on most Lunor models let us fine-tune the bridge for accurate progressive alignment.
Where is Lunor made?
Lunor is designed and manufactured in Baden-Wurttemberg, Germany, with Mazzucchelli acetate and German-stainless hardware. Small production runs are the standard, so you will rarely see two Lunor wearers in the same frame.
Does Voorthuis accept vision insurance for Lunor?
No. We don't bill vision insurance at any of our locations. We accept FSA and HSA, and provide itemized invoices for out-of-network reimbursement.
How long does it take to get my Lunor glasses?
If the frame is in our floor or back stock, single-vision lenses are typically 5 to 7 business days, progressives 7 to 10. For a specific Lunor model we need to order from Germany, allow an extra week before lens work begins.
Find Lunor at Voorthuis

Try them on at your nearest Voorthuis.

Stock rotates across our stores. Tell us the Lunor model you want and we'll transfer it to your preferred location for a consultation.